Author: hqt

To protect your safety, you should also observe a few instructions when taking off your industrial chemical gloves. If the gloves come into contact with waste, contaminants or substances that are harmful to health, contact with the skin should be avoided. 

How we must use industrial chemical gloves?

The ideal approach is includes the following steps:

1. Grasp one of the two gloves between the rolled edge and the wrist with two fingers
2. Then pull the glove away from your body, towards your fingertips
3. Keep holding the turned-over glove in your hand
4. Carefully run one of the free fingers under the edge of the remaining disposable glove
5. Pull the glove over your hand with your fingers on the inside,
6. you should now have both gloves with the clean inside on the outside
7. The gloves can then be disposed of (e.g. in household waste)
8. You should not forget to wash your hands to be on the safe side.

What else you should pay attention to in order to remove the industrial chemical gloves safely

In order to avoid self-contamination, please follow the correct sequence when removing industrial chemical gloves. This applies in particular when contact with pathogens, such as when working in the healthcare sector, cannot be ruled out or when working with chemicals and hazardous substances.

In general, disposable gloves are disposed of in the residual waste, but there are also a few things to consider when disposing of disposable gloves correctly, which you can also read about with us. It is therefore advisable to take off the gloves in the vicinity of a waste container and then to be disposed of directly.

Tips for stressed skin by frequently putting on and taking off industrial chemical gloves

You must follow these tips given below.

• Frequent use of industrial chemical glovescan quickly lead to dry and irritated hands.
• For hygienic safety reasons, it is not possible to do without it.
• We therefore recommend that you use moisturizing skin creams
• For this purpose, pH-neutral washing lotions can be used too.
• When buying, make sure that the skin care products contain moisture-binding ingredients
• Glycerin or urea and ideally do not contain any perfume or other fragrances.

Further information for your safety when using industrial chemical gloves

In addition to the correct donning and doffing of industrial chemical gloves, there are other aspects to consider when using disposable gloves. So that there are no problems during use, both the size of the glove and the material play a decisive role.

What is the importance of material of industrial chemical gloves?

The selection of the right material for industrial chemical gloves is of great importance, especially with the many possible uses of disposable gloves. Not all disposable glove materials are suitable for the same applications. If you do not know which disposable glove you should use for which application, you can also contact us for more information.

Importance of the industrial chemical gloves size

The right glove size plays an extremely important role, especially when it comes to disposable gloves. Often precise work has to be done in these functional gloves or human contact is necessary. In this case, if the gloves do not fit properly, this restricts your freedom of movement and the ability to perform certain hand movements.

 

Also, if you plan to wear the gloves for a longer period of time, it is important that the industrial chemical gloves size is determined correctly. Disposable gloves that are too small can be very uncomfortable on the hands and in the worst case even tear. Especially when dealing with medical issues

What is the disadvantage of wrong size glove?

It can have negative consequences on equipment, on the patient or while using certain chemicals. To avoid such an incident at all costs, gloves should not be bought too small. But gloves that are too large also have their disadvantages: They worsen the sense of touch and thus also hinder your activities.

The solution: determine the correct size before ordering your new disposable gloves. So that this works as well as possible, we have put together some hints and tips for measuring your hands below. This allows you to find out exactly which glove size you need.

How can you measure the right size for disposable gloves?

To find out which industrial chemical gloves size to buy, all you need is a flexible measuring tape and the following size chart. Place the tape measure loosely around the widest part of your hand - the palm is facing you. The thumb is spread apart and not included. For most people, the widest point is just below the knuckles.

Then read the circumference of your hand on the measuring tape. If you do not have a flexible measuring tape, you can alternatively use a thread. Place it around your hand instead of the tape and then measure the length on a ruler.

Last but not least: A few more tips on how to wear disposable gloves correctly

The glove size certainly plays the most important role when wearing industrial chemical gloves. This is the only way to ensure that it is convenient and can be used properly. In addition to determining your size and choosing the correct size correctly, other reasons can also have an impact on the comfort and condition of the gloves. These include, for example:

1. If the gloves are part of protective clothing, you should only put them on at the end.
2. They can be pulled over the cuffs of the clothing and are not damaged
3. Only put the gloves on with clean, dry hands.
4. The right glove size can be perceived as uncomfortable.
5. In any case, do not wear jewelry such as rings, watches or bracelets.
6. The same also applies to long or specially glued fingernails.
7. You can now determine whether you have determined the correct glove size.
8. If you have to pull it into the correct fit, avoid any pulling beyond normal limits.

What to do if your hand is between two industrial chemical gloves sizes?

Each hand is individual and so it can happen that your measured size is between two industrial chemical gloves sizes. In order to still make the right decision when buying gloves, you can use the following aspects as a guide:

Chemical gloves

Have you worked your way through our guide to chemical gloves and decided to use latex gloves? The advantages of the high elasticity and tear resistance are undisputed. Many medical professionals swear by latex gloves thanks to their comfort and excellent tactile sensitivity.

But one question still arises before buying. What are powder-free and powder-free gloves and which are the right ones for me? In the following, we will explain it to you, bring you closer to the advantages and disadvantages of the two glove variants and introduce you to alternatives.

Advantages of chemical gloves

The purpose of chemical gloves is to make it easier for the wearer. Powdered gloves are popular with those who tend to have damp palms or who like to slip their gloves on when their hands are wet. In addition, the powder reduces the moisture, so that the impression arises that your hands are dry.

History of gloves

Around 20 years ago, the powdered latex gloves variant was the much more popular and widespread variant. In the first half of 1997 the market share in USA was still around 74%. However, why this has changed shows some disadvantages.

 

Disadvantages chemical gloves

The powder from chemical gloves can promote the development of a latex allergy in some people. Latex gloves with powder contain a particularly large number of latex proteins. Soluble latex proteins can migrate from the glove matrix into the powder. As a result, the level of latex allergens in the air increases when the gloves are common, especially when the gloves are removed.

These can get into the respiratory tract of the user and patient and, in addition to allergic reactions; this can also lead to serious bronchial immediate-type reactions such as asthma. The powder can also settle on surfaces, clothing and skin, which can lead to skin irritation and itching.

Are chemical gloves cause allergy?

Since the serious consequences of wearing disposable chemical gloves, some of which led to occupational disability.

Why chemical gloves are forbidden in food industry?

The use of disposable gloves with powder is also strictly forbidden in the food industry and gastronomy, as food can be rotten.

Alternatives to powdered latex gloves

Despite the prohibition and disadvantages of powdered gloves, many people do not want to forego the advantages of being easy to put on and take off. To this end, alternatives develop in the past that do not affect the health of the user to the same extent as chemical gloves do.

Latex gloves with polymer coating

The coating prevents the material from sticking together and is insensitive to sweat. In addition, it protects against a latex allergy, as no latex proteins release and the skin does not come into direct contact with latex. Thus, they are also suitable for sensitive users and latex allergy sufferers and offer good protection from the disease.

The sliding inner layer makes it easy to put on and take off the latex gloves.

Why latex gloves with polymer coating are expensive?

Latex gloves with a polymer coating are a little more expensive than conventional un-powdered disposable gloves, but they offer the advantages of being able to put the chemical gloves on and off quickly and also provide good protection against latex allergens.

Disposable gloves made of nitrile and vinyl

Nitrile and vinyl gloves are a good alternative to powdered latex gloves. Since they do not use latex, they are suitable for people with latex allergies. Thanks to the smooth surfaces of these gloves, they are very easy to put on and take off, even without powdering.

Nitrile gloves are also safe for contact with and processing of food. In our guide you can find out more about the different materials common for disposable gloves and their respective advantages and disadvantages.

What is the disadvantage of nitrile and vinyl gloves?

Like other chemical gloves, nitrile and vinyl gloves are available in a powdered version. However, these also have disadvantages. Powdering leads to drying out of the skin can leave residues on clothing and textiles and also irritate the mucous membranes. Since disposable nitrile and vinyl gloves are already easy to put on and take off, buying powdered nitrile gloves and powdered vinyl gloves is hardly worthwhile.

How we can put on and take off chemical gloves correctly?

These gloves protect you from pathogens and harmful substances and help you comply with hygiene guidelines. However, you should observe certain procedures for safe use when putting on and taking off the chemical gloves, so that you do not come into contact with dangerous substances and pathogens and protect yourself from self-contamination.

To ensure that you can work safely with disposable gloves, we have provided you with instructions on how to put on disposable gloves correctly and how to take off disposable gloves correctly.

What to consider when putting on chemical gloves?

Wearing gloves does not replace thorough hand hygiene, so the following applies before wearing: Wash or disinfect hands. This should usually be done with soap and water / disinfectant (20 to 30 seconds).

Put on disposable gloves properly

Since these gloves can only withstand limited mechanical stress, it is important to keep the risk of overuse as low as possible. Long or artificial fingernails and jewelry can tear the chemical gloves quickly, so the fingernails should be kept short so as not to damage the gloves. Remove jewelry from your wrist or finger before putting on gloves.

• When putting on the glove, it is first pulled loosely over the fingers of one hand.
• The thumb of the hand that is still free then grips the glove on the underside of the wrist.
• Then you grasp the thumb with the remaining fingers on the outside
• And carefully put the glove over the wrist without overstretching it.
• Pull the glove into the correct fit and bring the fingers of the glove into the correct position.

Conclusion: Chemical gloves powdered or powder-free

Due to the health risk for users and fellow human beings that comes with powder, we do not recommend buying and wearing chemical gloves or powdered latex gloves and generally powdered gloves! We recommend the use of powder-free gloves made of nitrile or vinyl or latex gloves with a polymer inner coating.

Disinfect examination gloves: is it possible?

In the healthcare sector, numerous patients are treated in a short period of time, which is why the risk of infection in a hospital, doctor's office or nursing home is of course high. Both the staff and the doctors therefore have to disinfect their hands regularly and change their examination gloves again and again.

This hygiene will ensure that there is a high level of self-protection and patient protection.

However, if disposable gloves are always common, this has an impact on costs. The question arises as to whether the costs can perhaps be reduced by disinfecting the gloves. It would be enough if, for example, the gloves could only be changed after every second patient. This sounds plausible in theory, but how is it in practice?

When is it allowed to disinfect examination gloves?

There are strict rules and precise definitions as to when it is allowed to disinfect the examination gloves. The following rules apply to care facilities and medical facilities:

Successive blood draws: There is usually no high risk of contamination during this activity. It is therefore allowed to disinfect the disposable gloves afterwards instead of changing them.

Routine activities: It is also permissible if the routine activities carry out on the same patient. A change is only important if an unclean activity carry out.

What must be considered when disinfecting examination gloves?

Of course, there are also very important regulations in this regard that must come into account when the examination gloves are disinfected.

Hygiene planning

Every company in this industry has a hygiene plan, which also includes regulations regarding glove disinfection. In addition, the urgency is emphasized again. Raising awareness in this regard is always important. It will also be noted that gloves with perforations must not disinfect.

EU standard 374

The European standard 374 assumes that the disposable glove is resistant to chemicals. If the glove meets this standard, then it is only suitable for disinfection. The standard is checked by a 30-minute test procedure, whereby at least one alcohol is added to the material. The breakthrough time must not be undercut.

Consider manufacturer information

The manufacturer's information must always be taken into account, because it also states whether the examination gloves may be disinfected at all. If this is ruled out, it is not advisable to disinfect with this product, but to change it after each patient.

Contamination must be ruled out

If there is contamination with, for example, excreta, secretions, blood or the like, the gloves must no longer be disinfected, but must be disposed of immediately.

Choose a suitable disinfectant

For personal and patient protection, it must be ensured that the selected disinfectant can kill any infectious agents that may be present. A suitable disinfectant should therefore always   be selected.

Don't wear examination gloves for too long

In medical facilities or in nursing homes, disposable gloves should never be worn for more than 30 minutes and should not be disinfected more than five times. The examination gloves must then be changed immediately. If you are working in an intensive care unit, the Robert Koch Institute even recommends a change after 15 minutes.

Are there special criteria for protective gloves?

Yes, there are various criteria for protective gloves that must be strictly fix to. Especially, when it comes to dealing with usable solutions. The following criteria we must meet:

Moisture-proof

Recommended as personal protective equipment (according to category 1 and category 2)

Standard DIN EN 374 (against chemicals and microorganisms)

If the gloves are worn for a long period of time, a protective skin cream should is good to apply. In the case of liquid-tight protective examination gloves, the skin underneath will become dry. The use of a cream should not neglect.

Nitrile gloves or latex gloves

Protective gloves made of nitrile are usually much more resistant than latex gloves, especially to alcoholic disinfectants with refitting. The latex material is usually changed by fats. We recommend that our customers obtain insurance from the manufacturer about the type of disinfectant that can be common for the nitrile gloves or latex gloves.

Are these gloves also suitable for cleaning work?

If a glove is important to carry out the cleaning work, with which one can continue to feel, then protective gloves are also suitable. Since examination gloves wear longer during this activity, we pay attention to the protective skin cream, as already mentioned.

However, there are also special cleaning gloves that are much thicker, but can provide better protection against sharp edges, chemical substances and the like. These models are therefore better, especially when there is time pressure. In principle, however, medical protective gloves can also be worn.

Why gloves are necessary for surgical team?

It is important to make sure your surgical team protects from pathogens in the blood and other body fluids that are toxic, passable from person to person and cause the spread of disease. As a surgeon, you want to make sure that you and your team is safe that is one of the personal protective examination gloves in the theater.

How we can choose examination gloves?

By choosing the right surgical glove; there are several things to consider including borderline safety, clinical effectiveness and sometimes costs. Yes, at the end of the day, you want to make sure that you get the value of your purchase. This piece of nitrile gloves is a popular demand.

The glove, which is impressive for surgical and other medical procedures, is one of the products to consider when purchasing your next surgical glove.

It offers better elasticity than other products; Better resistance to perforation and abrasion. Fits comfortably in use; Sensitive to touch Infusing a micro-rough surface ensures that the examination gloves provide the right grip and enable a secure hand.

Conclusion Examination Gloves

Examination gloves have a smooth surface that offers a natural sense of touch. This glove has an ergonomic design that reduces common hand fatigue during operation. The dust-free function limits the risk of a latex allergy.

Surgical gloves made of nitrile nevertheless guarantee optimal protection, excellent hygiene and a comfortable fit. The gloves are good for single use and meet even the strictest quality requirements of industry and legislators.

One of the advantages of the product is that the nitrile disposable gloves are powder-free and 100% latex-free. There is no loss of comfort or security. It should also be emphasized that the products convince with their chemical resistance and also because they are impervious to viruses.

For which purposes are surgical gloves suitable?

The surgical gloves are common where the staff suffers, for example, from skin eczema or from a latex allergy. When it comes to care needs in hospitals, nursing homes or surgical practices, it is important that allergy-causing ingredients avoid so that patients and residents, who may suffer from them, do not come into contact with them.

Nitrile gloves did not have a particularly good reputation at the time, but this has completely changed. The tear resistance, the ergonomic fit and the high tactile sensitivity as well as the elasticity of the products are at a very high level. Even without powder coating on the inside, the gloves care easy to put on and taken off.

Use of surgical gloves

The surgical gloves are common, for example, by the rescue service, in corona test stations and also in quarantine stations. Apart from that, the products are also common in these areas:

• Nursing homes, social stations
• Cleaning trade, food industry
• Restaurants, bars, snack bars and bakeries
• Tattoo, nail and cosmetic studios
• Emergency services, surgical practices and vaccination centers

What are surgical gloves made of?

The material nitrile belongs to the copolymers and thus consists of different components. The essential component is acrylonitrile, which is also common in the production of thermosets - for example, clamping blocks for children come from it.

The nitrile rubber is in turn obtained by polymerization, which developed in 1930 by the founders of IG Farben. The chemical company was the world's largest at the time and had its headquarters in Frankfurt am Main.

Benefit of surgical gloves

As far as the benefit of surgical gloves is concerned, the advantage here is that plasticizers are no longer required. Cold nitriles have a rubber-like and elastic property, which is why the material is extremely suitable for disposable gloves. This is also the reason why the nitrile gloves are so durable and tear-resistant.

Disposable nitrile gloves in healthcare

In the healthcare sector, it is imperative that personnel protect themselves from bacteria, secretions, germs and excrement. Disposable gloves are therefore a standard item that should not be missing.

This also serves to protect the patient, since it also avoids the possibility of disease transmission. Surgical gloves are therefore also suitable for surgical use.

The disposable nitrile gloves virtually come for the surgical sector. The sense of touch retains, which means that examination activities are hardly wrong and sensitive tasks is easy to carry out without any problems without having to forego the protection of gloves.

Why we must choose surgical gloves?

The surgical gloves for single use go through various endurance tests in production, which can guarantee excellent workmanship. In addition, the products have an excellent price-performance ratio, whereby additional savings are easy to make with our volume discount.

Pay attention to hand care

If you want to buy surgical gloves, you should also ensure optimal skin protection here. If gloves we wear over a long period of time, heat builds up and thus perspiration builds up. The moist hand environment damages the surface of the skin and makes skin care essential. We recommend oil-water-based skin creams, as these ensure skin regeneration and absorb very quickly.

There is nothing wrong with choosing a cream with other nourishing ingredients.

What must be common for hand care?

Perfume-free creams, lotions and ointments with a pH value below 6 are always recommended. If the hands are particularly dry, then a product with oils, fats, urea or glycerin should be chosen. Before going to bed, it is a good idea to use a product that is high in fats.

This is how surgical gloves are common correctly

These instructions provide information on how and for which activities the surgical gloves should wear:

• Wear disposable nitrile gloves when working with water.
• Gloves should be worn with the longest possible cuff
• Nitrile gloves are recommended
• Latex gloves can cause allergies and the powder may cause irritation.
• For hygienic reasons, single-use gloves should only be common once.
• Hands should always be dry and clean when the gloves are on.
• Persistent moisture on the skin should avoid and gloves must change.

Is the product suitable as an infection prophylaxis?

As the Deutsche Apothecary Zeitung reports, gloves can protect against the spread of pathogens. The products also help against aggressive substances such as cleaning agents, which the nursing staff often has to deal with.

The professional association for health service and welfare (BGW) has also provided information for this and presented the advantages and disadvantages of the various types of gloves.

Disadvantage of surgical gloves

The disadvantage of surgical gloves was that they are sensitive to fats and oils, which is why hand care products have to be avoided in this case. This is harmful to the hands, which is why nitrile / vinyl gloves have another advantage.

With regard to infection prophylaxis, it should still be noted that everyday protection is only good if hand hygiene does not suffer as a result.

Thorough hand washing with soap and water for 30 seconds and drying with disposable towels remains important. The RKI does not recommend gloves for the population, only mouth and nose protection and a minimum distance of 1.5 meters. This means that these utensils also reserve for nursing and surgical staff.

Summary Surgical Gloves

Surgical gloves offers protection from toxic chemicals. Provides a firm hold even when it is wet or damp. However, these surgical gloves are versatile, which means they can be common for a wide variety of things, from home to electronic work, etc.

Latex examination gloves are popular products in many fields from medical, food to laboratory. There are many types of medical gloves of which powdered medical gloves are the most common. Why add powder to medical gloves? What are the benefits of powder-free medical gloves? This article will answer these two questions.

The problem with powdered latex examination gloves

The first these gloves produced were powder-free. However, due to latex rubber (with high friction), the gloves are difficult to put on and take off. So NSX adds powder to the glove to reduce friction between the glove and the hand, thereby making it easier to put on.

However, latex examination gloves also have some disadvantages:

In a low-humidity environment, the powder in the latex examination gloves will absorb moisture on the skin of the hands, causing the skin to dry out. When preparing food, the powder in the gloves can be released into the food. Some people are allergic to the protein in latex rubber (common symptoms are itching, swelling, redness, etc.)

If you can accept the above disadvantages then continue using powdered gloves. But if you experience an allergic reaction, stop using it and contact the supplier for advice on suitable replacement products.

Types of rubber materials common to make latex examination gloves:

Ø Latex rubber

Nitrile synthetic rubber, extracted from petroleum. In addition to nitrile, other synthetic rubbers such as vinyl and neoprene are also common to produce gloves. However, because it does not meet the technical requirements (vinyl) or the price is high (neoprene), it is not selected to produce medical gloves.

Ø Latex powder-free medical gloves

The most common reason users decide to forgo powdered latex examination gloves is an allergy problem to the proteins in the latex. So the problem here is the protein in the latex.

How to deal with allergy problem?

To overcome this drawback, NSX gloves use one of two ways:

Ø Method 1: dip in chlorine solution

As a result, the amount of protein in rubber is significantly reduced. There by eliminating the risk of allergic reactions almost completely. And then came out Chlorine medical gloves. In addition to the use of protein extraction, this method also reduces the stickiness and friction of rubber easier to wear gloves. However, the downside is that the rubber color is slightly yellow.

Ø Method 2: polymer coating

The polymer layer separates the skin of the hands from the rubber => eliminates the risk of allergies. In addition, the polymer layer is slippery so it is easier to wear gloves.

Latex examination gloves without powdered rubber nitrile

Nitrile is a synthetic rubber, so it does not contain the protein of latex rubber. Using nitrile latex examination gloves completely eliminates the risk of causing an allergic reaction. However, the nitrile rubber surface still has a high level of friction, making it difficult to wear gloves.

Therefore, in order to make the gloves easy to wear, two methods of manufacturing powder-free latex gloves can also be applied in this case.

 

Why nitrile rubber gloves have not been able to completely replace latex examination gloves?

That's because nitrile gloves are inferior to latex gloves in terms of elasticity and grip. Grip feel is a very important element of medical gloves common in surgery. In order to have precise manipulations, the surgeon requires a very high sense of grip. Currently, nitrile medical gloves are mostly common as examination gloves.

Another reason is that latex examination gloves are more expensive than latex gloves (by 20% or more depending on weight/piece). For manufacturing and processing enterprises, this is an issue to consider.

The future of powder-free medical gloves

Latex and nitrile powder-free medical gloves have many advantages. However, the price disadvantage makes them not yet able to replace powdered medical gloves. Until the price issue is resolved, perhaps the best solution is to use both powdered and non-powder gloves in parallel.

The medical glove market has not only 1-2 types but is quite diverse in terms of types and manufacturers. Besides powdered medical gloves, there are other types of medical gloves such as: chlorine-free medical gloves, powder-free nitrile medical gloves...

Pros and cons of powdered latex examination gloves

One of the biggest advantages of powdered latex examination gloves is that they are easier to put on and take off. Imagine you work in a hot and humid environment, your hands sweat a lot, the powder in the gloves will absorb sweat from your hands and make putting on and taking off gloves much less strenuous.

Disadvantages of latex examination gloves

• In dry, low-humidity environments, the powder in gloves can cause the skin to dry out.
• If not stored in the right environment (low humidity), the powder in the gloves will easily clump.
• During food processing, the powder in the gloves can be released into the food.
• Some people experience itching or redness when using powdered gloves.

Two popular types of powder-free gloves on the market:

• Chlorine-free gloves (latex rubber)
• Neoprene gloves (nitrile rubber)

Ø Chlorine “powder-free” medical gloves (latex)

Why is "no flour" in quotes? That's because although it is called "no powder", in fact there is still a very small amount of powder on the glove.

Ø Where does this little powder come from?

Chlorine-free gloves are latex examination gloves that have been "washed" with chlorine. This process helps to remove most of the powder on the glove. The amount of powder left on the gloves is very small and safe for users. According to the US FDA , medical gloves with a powder content of less than or equal to 2 milligrams per glove are considered "powerless" gloves.

Ø Advantages

• Easy to put on and take off gloves
• “Powder-free” (according to FDA standards)
• Does not cause allergies

Ø Disadvantages

• Slightly yellow color
• Smells like chlorine
• Relatively high price

Summary

The green neoprene gloves come with better material included design technology to reduce the muscular effort that comes to cause stress in the joint area of ​​the arm. This surgical glove was subjected to additional tests and to have a low risk of irritation during intraoral interventions. It also offers a secure grip and allergy protection.

Comparison between latex gloves and nitrile glove

Medical glove is an indispensable product in the medical industry with the effect of infection control, prevention of cross-infection, and health safety for patients and medical staff. Currently on the market there are many types of medical gloves products, in which, classified by origin, there are two main types: Latex gloves and Nitrile glove.

Article content

1 Latex Gloves

2 Nitrile Gloves

3 Powdered gloves

4 Powder-free gloves

5 Limitations of powdered latex gloves

6 What kind of medical gloves should be common today?

Latex Gloves

These gloves made from natural rubber materials formed during processing along with temperature and some chemicals. It forms an extremely good protective layer and is very supple, fitting well when we wear gloves. Identification: Latex gloves are opaque yellow.

However, the first nitrile glove was quite difficult to put on because of the friction between the rubber and the skin of the hands. For healthcare workers who come into contact with large numbers of patients, frequent glove changes are a must.

Why powder is common?

Understanding this need, medical glove manufacturers have devised a simple method: using powder to reduce the friction between the skin of the hand and the rubber to make it easier to put on and take off. From there, cornstarch is common to coat the inside of the glove so that it can be easily put on and taken off.

On the other hand, after a period of wearing gloves, the hands will sweat, causing moisture and then, the powder in the gloves helps absorb sweat, creating a comfortable feeling for the wearer. This is even more useful for people who have a lot of sweaty hands.

Nitrile Gloves

Nitrile gloves are synthetic rubber, manufactured similar to Latex gloves but do not contain any latex proteins, so they do not cause allergies in some sensitive people. Gloves have good water resistance and oil resistance, so these gloves are widely common in all industries that require high hygiene such as testing, dentistry and health care as well as non-medical industries such as industry, food processing.

Powdered gloves

Gloves “Powdered” means that cornstarch is coated in the glove to make it easier to put on and take off the gloves. Often common in the medical industry because nitrile glove is cheaper and especially with the requirement of “one patient-one pair of gloves” to avoid spreading the disease, it is faster and easier to use powdered gloves.

Powder-free gloves

“Powder Free” gloves mean gloves manufactured by a technological process that have a Polymer or Chlorine coating on the entire surface to prevent adhesion when wearing gloves. Commonly common in biotechnology and pharmaceutical industry, drive industry, semiconductor and microelectronics, especially in surgery to ensure absolute safety for patients with powder allergies can also be treated. Heal wounds quickly.

 

Limitations of powdered latex gloves

That is, there is a small portion of the population that is allergic to the protein in natural rubber (latex). The protein left in the nitrile glove after the manufacturing process will bind to the powder. Long-term storage, when taken out to use, this powder comes into contact with the skin of the hands and causes an allergic reaction to the user.

A common symptom of allergy sufferers is itching when wearing gloves. Even severe allergic cases will cause swelling, unwanted redness of the skin.

Why powdered free gloves are good during surgery?

On the other hand, in surgery, the use of powder-free medical gloves is almost a must. Because when using powdered gloves or nitrile glove, there is an increased risk of powder falling on the surgical area, making the wound slow to heal or possibly becoming infected. Therefore, although powder-free gloves do not offer the same quick on and off action as powdered gloves, they offer a higher level of safety.

What type of medical gloves should be common today?

Each type of latex or nitrile glove product has its own advantages and disadvantages. Particularly for Latex gloves, it will bring a natural and easy grip feeling.

Nitrile gloves are durable, strong and highly puncture resistant. The affordable powdered gloves are the right choice for daily care visits and the powder-free gloves are safer for minor surgeries and open wounds or users with sensitive skin. .

	Advantages	Disadvantages
Latex gloves	Extremely good elasticity, maximum stretch and high puncture resistance. - Excellent adhesion ability, creating a natural grip feeling like a second skin. - Biodegradable so it is environmentally friendly. - Affordability. – Diversity of products: powdered, powder-free, surgical gloves.	- May cause allergies. - For the product line with powder, it can also cause dry skin after a long time of use.
Nitrile gloves	– Suitable for sensitive terrain when users are allergic to latex protein in natural rubber gloves. Very high wear resistance, chemical resistance and puncture resistance.	However, the product has less elasticity than Latex gloves. - Higher cost. - Non-biodegradable.

 

Properly clean nitrile glove for reuse

Most of us will not want to clean a pair of woolen gloves that cost only a few thousand dongs but will throw them away after they get dirty. However, for hundreds of thousands of Kevlar ^® nitrile glove, cleaning and reusing gloves will save a lot of money.

Each type of glove is made from different materials, so we need separate cleaning methods for each type. This article will show you how to clean common protective gloves.

Nylon fiber gloves

• Use warm water about 40 degrees C + washing powder.
• Moreover, can be dried in a tumble dryer at below medium heat. Do not use high temperature.
• Anti-static nylon fiber gloves
• Similarly, cotton/polyester fiber gloves
• Use warm water about 40 degrees C + washing powder.
• Furthermore, can be dried with a tumble dryer on medium heat.

Cotton/polyester fiber gloves

Gloves with coating

The coating on the nitrile glove is quite leathery. Therefore, we need to choose the right cleaning solution to maintain the properties of the coating.

• Use warm water of about 30 degrees Celsius or lower + powder or laundry detergent specially designed for children's sensitive skin.
• Moreover, can be dried in a tumble dryer at below medium heat. Do not use high temperature.
• Do not use bleach

Have you ever wondered why the latex gloves you are using are corroded so quickly by chemicals? Then you ask the seller for advice but you only get very general answers like advice to choose a thicker glove. Your problem may not be in the thickness of the glove but in the material of the glove.

What to pay attention to when choosing latex gloves?

1. The type of chemical that will come into contact
2. Chemical concentration
3. Chemical temperature
4. Moreover, chemical exposure time
5. Type of exposure – immersion in chemicals or splashes of chemicals
6. Area to be protected – hand, forearm or even arm
7. The dexterity that gloves support when the user manipulates objects
8. Grip
9. Size and comfortable feeling of the user

Criteria for choosing latex gloves

The most important criterion when choosing latex gloves is determining the type of chemical to be exposed. You should look in the product's SDS or MSDS to find out which chemicals are suitable for gloves.  However, in practice, we will encounter cases of exposure to a mixture of many chemicals, and at that time we cannot determine what the chemical name after the reaction is.

 

Then we need to analyze that mixture to find the chemical to which the glove has the weakest resistance. Next, refer to the chemical's Permeation Breakthrough Time parameter for the glove. For example, chemical A + chemical B gives chemical C. If you have not determined what chemical C is, see the glove that is most resistant to chemical A or B.

What are Degradation Rating, Permeation Breakthrough Time and Permeation Rate?

When using the two online tools above of Ansell and Showa, you will encounter three important parameters. These are the three parameters commonly used by NSXs to evaluate latex gloves. Permeation test results when searching for “sulfuric acid” (50%) on Ansell website

Ø Degradation Rating

It is the evaluation of the degree of physical deterioration of gloves when exposed to chemicals. Contact with chemicals can cause gloves to expand, harden, and soften. This parameter is classified from the lowest level P (Poor) to E (Excellent).

Class P indicates that the glove has obvious deterioration in contact, class E indicates that the glove shows little change in contact. Note the two letters NR (Not Rated) meaning that NSX recommends not using gloves with this chemical.

Ø Permeation Breakthrough Time

It is the time from when the latex gloves are exposed to the chemical until the time when the chemical is detected on the inside of the glove. Showa calls this parameter Breakthrough Detection Time (BDT).

Ø Permeation Rate

This parameter represents the ability of the chemical to penetrate the glove surface without creating holes visible to the naked eye. To make it easier to understand, let's imagine the case of a balloon. When you watch the balloon fly you will notice that the size of the balloon will decrease over time.

Here, the glove is the balloon and the air inside the balloon is the contact glove chemical. Showa website does not show this parameter, I am not sure if Showa has tested this parameter.

Ø Note: Important points

There are a few things you need to pay special attention to:

• There are not perfectlatex gloves.
• Each type of glove is resistant to only certain chemicals.
• Do not use test results or parameters of NSX A and apply to NSX B gloves.
• Two glove models with the same construction material but different thicknesses give different results.
• Consider other factors such as the temperature of the chemical
• or the risk of the glove being cut or punctured when in contact with sharp objects.
• Inspect the glove surface before use. There may be holes or cuts from previous use.
• Do not use medical gloves that function as chemical resistant gloves.
• Medical gloves are too thin to provide the required time of protection.
• Find out more about the chemical you will be exposed to.

Why medical gloves are usually made of latex and nitrile?

There is no perfect pair of gloves for every job! Why? Because each type of glove is only suitable for certain jobs. The most obvious example is that most medical gloves on the market today are made of latex; latex gloves or nitrile, with no vinyl medical gloves at all. To help us choose the right type of medical gloves, I will analyze the basic advantages/disadvantages of each material as follows:

Ø Latex:  

It is also known as latex rubber (from the rubber tree). Latex has the advantage of good elasticity, high tear resistance, creating a real feeling when holding. However, the puncture resistance and chemical resistance are not as good as other materials. The price of latex medical gloves is considered the general price of the medical glove market.

Ø Vinyl:  

It is a cheap alternative to latex. However, in terms of elasticity, tear resistance is worse than latex. Vinyl gloves are often used in food.

Ø Nitrile:  

These wear resistance, puncture resistance, chemical resistance are the outstanding advantages of nitrile. In the medical field, with its advantages, nitrile gloves are gradually replacing latex gloves. The cost of nitrile medical gloves is about 20% higher than these gloves (same weight) and the trend is decreasing.

Ø Neoprene:

Among gloves manufacturing materials, neoprene stands out in its chemical resistance, long service life and heat insulation ability. With these properties, neoprene gloves are often used as laboratory gloves. However, the price of neoprene gloves is currently very high.

Below is a more detailed description of the features of each type of medical glove:

FEATURES \ MATERIAL	LATEX	NEOPRENE	NITRILE	VINYL
Anti-permeation	Excellence – latex gloves are the benchmark in penetration resistance.	Very good – similar to latex.	Excellent – Nitrile gloves have outstanding puncture and tear resistance.	Poor – Vinyl gloves are prone to punctures and tears. The tightness in the wrist is poor, so it also reduces the protection area.
Allergy	Depends – Latex contains proteins that cause allergies in a small portion of the population. However, powder-free latex gloves have very little protein content, so the risk of allergies is very small.	Excellent – Does not contain latex proteins.	Very Good – Contains no protein in latex.	Good – Vinyl does not contain proteins like latex.
Durability and longevity	Excellent – latex gloves have a long life and great stretch. Stretchability typically ranges from 3500 psi or higher.	Very good – Similar to latex but if punctured, it will easily lead to tearing from the puncture. Stretchability similar to latex.	Excellent – Nitrile gloves are more puncture resistant than all other gloves. The tensile strength is usually higher than 3000 psi.	Weak – Vinyl is a glove with poor physical properties and the worst life of all gloves. The tensile strength is usually just under 2000 psi.
Elasticities	Excellent – Latex's elasticity surpasses that of other gloves. The ability to maintain the original shape after stretching is also very good.	Excellent – The elasticity of neoprene gloves is not much inferior to that of latex.	Very good – The elasticity is quite good. Unlike latex, nitrile gloves will remember the size of the wearer's hand.	Poor – Vinyl gloves have poor elasticity and this property fluctuates depending on the manufacturer.
Anti-puncture	Very good – Latex gloves are very puncture resistant.	Good - Neoprene's puncture resistance is worse than nitrile and latex.	Excellent – Nitrile's puncture resistance is superior to other gloves.	Least

 

Conclusion:

You see, choosing latex gloves is not simply choosing the thickest glove, but also having to consider many other factors. Hopefully the article will make it easier for you to choose chemical resistant gloves.

Disposable gloves are the thinnest and lightest medical gloves available today. The above type has the main component from very durable synthetic rubber Acrylonitrile Butadiene. Moreover, there is much other rare strength that the product just now holds. Believe that the following suggestions will help us find a long-lasting, beautiful and safe line to use again!

Composition of safety disposable gloves

Disposable gloves are made from Acrylonitrile Butadiene neoprene. The standard production process with modern leading technology also helps this line to ensure outstanding safety for users. Accordingly, the product does not contain latex, which is easy to cause allergies. At the same time, the above type also removes many harmful components.

What's more, powder-free, non-sterile Nitrile gloves offer outstanding durability. It is Acrylonitrile Butadiene with good stretch ability that helps the product avoid tearing, water leakage, etc. significantly. Therefore, we can protect our precious hands more easily with this great option!

Disposable gloves with excellent design

Quite a few people find it inconvenient to use these gloves. This is because the product is thick and difficult to manipulate. Not to mention the tight, jacked or too loose fingers also cause a lot of hindrance in the working process. If you are also afraid of what is satisfactory, Nitrile disposable gloves are worth the priority. Because the product has a superior design with the following basic features:

• Straight fingers make it easier for users to manipulate, hold, move, etc.
• The wrist band makes the process of carrying the product easy, avoiding breakage and leakage.
• There are many sizes such as XS, S, M, L, XL, so they fit the size of hands, fingers, of many different users.

The thinnest disposable gloves available today

 

These gloves are currently the thinnest medical gloves available today. The above is guaranteed to give you a comfortable feeling like nothing in your hand. Meanwhile, the disposable gloves still maximizes the impact of protection for users. Therefore, the work also increases the efficiency significantly. This is also the reason why this line is increasingly appreciated in the market today.

The lightest disposable gloves available today

Not stopping there, the above type is also the lightest glove line today. Each glove weighs only 2.5g/pcs.

This helps you avoid the phenomenon that the product creates a feeling of entanglement, making operations with fingers, hands, etc. become slowly. This reason alone is enough for many savvy customers to prioritize Nitrile gloves over other similar products on the market.

Produced on modern technology to thoroughly remove Nitrosamine

We apply the world's leading modern disposable gloves manufacturing technology. This process thoroughly removes Nitrosamine, an ingredient commonly found in conventional products. It is also a known carcinogen.

Therefore, Nitrile medical gloves have given you extra peace of mind. This is a great choice that offers outstanding long-term health protection for users.

Extremely limited chlorine sterilization harms the skin

While some lines of gloves contain chlorine to kill bacteria, sterilization easily causes dryness and peeling of hands. Then Nitrile gloves have significantly improved this limitation. Accordingly, the product has very little chlorine enough to be antibacterial and hygienic. At the same time, you do not have to worry about facing dry, peeling skin, after a long time using the product.

Free of Sulfur and other harmful substances

Along with that, we also thoroughly remove harmful substances. At the same time, the standard process has helped this line achieve a series of prestigious certifications. Therefore, you can safely use disposable gloves without worrying about the potential risk of cancer like some cheap gloves on the market today.

At the same time, modern technological processes help gloves increase elasticity. Thanks to that, the product is anti-chemical, anti-aging outstanding. What's more, you don't have to worry about the risk of your gloves leaking, breaking or slipping during the cleaning process.

Preeminent design that hugs the hand tightly, rare and light

The perfect combination of modern technology and standard materials has helped us to create quality products.

Disposable gloves are appreciated for their superior design

Many partners/customers are experiencing unexpected satisfaction with the system’s disposable gloves thanks to the following outstanding advantages:

Ø Thin

These gloves are currently the thinnest medical gloves. This design helps the gloves fit tightly to the skin of hands, fingers, wrists, palms, etc. The above creates convenience for users during manipulation.

Ø Light

Weighing only 2.5g/pcs, the above line is also the lightest glove. This factor also helps customers avoid entanglement, being hindered by the heavy rubber layer that makes work less productive.

Ø Good elasticity

Nitrile gloves ensure good stretch, elastic with superior tensile strength. As a result, the product is more durable, avoiding tearing, perforation, etc., losing the feature of protecting your precious hands.

Ø Fashionable

We help customers add a variety of options to suit their needs and preferences: The line with modern machinery produces gloves with various sizes from XS, S, M, L to XL. The product is available in 3 colors: White, Blue, and Light Blue, trendy and sophisticated.

Detailed review of disposable gloves: should I buy?

Are disposable gloves any good? Where is this line manufactured? How safe to use? Is it durable? All the same questions mentioned above will be quickly answered in the article below. Please read along to see which the wise choice you should prioritize is. Trust that the information mentioned will not waste your time in vain!

Advantages of disposable gloves

These gloves have the following advantages.

• These glovesare designed for both hands.
• Straight fingers are easy to use.
• Combined with that, the product is sealed on the wrist,
• Creates a sense of certainty when used.
• These gloves have a thin, light, hand-hugging design.
• These are the most comfortable to use.
• Overall, the product has a beautiful, trendy design.
• Currently, powder-free, non-sterile disposable gloves are available.

Conclusion

For medical purposes the use of disposable gloves is very common. Therefore, it is important buy reliable gloves for better medical operation handling. Moreover, you should buy these gloves in bulk.

You think simply rubber medical gloves. But in fact, rubber also has many types with different advantages and disadvantages as TPE gloves. The application lead is also different.  Once you understand that, you will know how to choose the right type of glove for each industry

What are TPE gloves?

These gloves are disposable rubber gloves common in medical, surgical, and medical examination to help prevent cross-infection between caregivers and patients. These come from different types of rubber. They may or may not be powdered.

The powder here is cornstarch (corn) to lubricate the gloves, easier to wear. However, in some sensitive jobs, people need not to use powdered medical gloves. Take a look at the rubber glove manufacturing process.

Materials for making TPE gloves

Take a look at 3 basic materials for making TPE gloves

Latex

It is also known as natural rubber (from the rubber tree). Latex has good elasticity, high tear resistance, feels real when holding. However, the puncture resistance and chemical resistance are not as good as other materials. This is the first, most basic type.

Nitrile

Also known as Nitrile rubber stands out for its wear resistance, puncture resistance, and chemical resistance. With its advantages, Nitrile gloves are gradually replacing latex gloves, especially in medical field. The cost of Nitrile medical gloves is about 20% higher than Latex medical gloves (same weight)

vinyl

People use Vinyl medical gloves as a cheap alternative to TPE gloves. However, Vinyl gloves have less elasticity and tear resistance than Latex. Therefore, vinyl gloves are often commonin food, seafood processing, etc.

Pros – Cons

The following table with detailed description will give you a more general overview of these 3 types of gloves

Latex medical gloves (Latex gloves) and Nitrile (Nitrile gloves) are the two most commonly commontypes.

Materials/Properties	Latex	Nitrile		vinyl
Osmotic	Excellence – the benchmark in waterproofing	Excellent – ​​outstanding puncture and tear resistance.		Poor – Gloves easily puncture and tear. The tightness is poor, so it also reduces the protection area.
Allergy	Depending on the type – Latex contains certain proteins that cause allergic reactions in some people. Powder-free TPE gloves have very little protein content, so the risk of allergies is small.	Very good - Hypoallergenic		Good – Hypoallergenic
Reliability	Excellent – ​​longevity and high elongation. Tensile strength >=3500psi	Excellent – ​​high puncture resistance. Tensile strength >=3000 psi		Weak – Vinyl is a glove with poor physical properties and the worst life of all gloves. The tensile strength is usually just under 2000 psi.
Elasticity, comfort	Excellent – ​​Latex's elasticity surpasses that of other gloves. The ability to maintain the original shape after stretching is also very good.	Very good – The elasticity is quite good. Unlike TPE gloves, nitrile gloves will remember the size of the wearer's hand.		Poor – Vinyl gloves have poor elasticity and this property fluctuates depending on the manufacturer.
Anti-puncture	Very good – Latex gloves are very puncture resistant	Excellent - Nitrile's puncture resistance is superior to other gloves.		Least
Chemical resistant	Good – Good resistance to caustics and detergents.	Excellent – ​​Resistant to a wide range of chemicals, especially organic solvents.		Weak – Vinyl is soluble in organic solvents.
Price	Very Good – Powdered TPE gloves are considered the standard of medical gloves. However, the price of powder-free latex gloves is much higher than that of powdered ones.	Good – Nitrile gloves cost more than latex.		Very Good – Same price as latex or less. Is a cheap alternative of latex gloves in case users are allergic to latex proteins.
Application of tpe gloves	It is the choice in the medical field except in cases of allergies.	As an alternative to latex gloves. Especially where high mechanical properties or chemical resistance are required.		Is the low cost alternative of TPE gloves. Not recommended for use in the medical field or where there is a high risk of infection.

Powdered and non-powdered TPE gloves

To make disassembly easier, more convenient and faster, powdered TPE gloves are available, including nitrile and latex lines. The flour common here is cornstarch. However, studies show that cornstarch helps keep the protein in rubber longer on the surface, increasing the level of skin allergies when used, even dermatitis when the skin is wet or injured.

Not to mention, the use of medical rubber gloves with powder is not recommended in surgery or the food processing and cooking industry because the powder is easily spread out leading to poisoning, affecting health. Therefore, although powder-free TPE gloves do not offer the same quick on and off action as powdered ones, they offer a higher level of safety.

Instructions for wearing – removing medical gloves properly

Put on and take off medical gloves properly so as not to get infected with bacteria. This is one of the rigorous tests, especially for people working in the fields of medicine, food, and medicine. Currently, medical rubber gloves are sold quite a lot at stores, pharmacies or e-commerce sites, consumers can easily choose the right type.

However, to avoid buying poor quality products, don't forget to carefully read the ingredients, types, origin, expiry date... before you buy.

What are protective TPE gloves?

Protective TPE gloves are gloves made of rubber including 100% natural rubber and synthetic rubber, to ensure safety for workers' hands. So these gloves have many types such as household gloves, industrial gloves and nitrile rubber gloves, latex gloves. Household gloves and industrial gloves we've shared in previous articles, please You see: household gloves and industrial gloves

Nitrile rubber gloves made from synthetic rubber have good water and oil resistance, so they are widely used, especially in clean rooms such as anti-static common in electronics, in laboratories. TPE gloves, the main ingredient is natural rubber, which is widely common in the medical, cosmetic and medical industries because of its high hygiene and safety factors.

What are wool safety gloves?

Therefore Protective wool gloves are gloves made from wool yarn woven by machine depending on the number of grams and needles that have different weights. Protective wool gloves help reduces friction and smoothness when working, commonin normal jobs such as construction, gardening, janitors. The price of woolen gloves is also very cheap and sold in many places. Rubber-coated wool gloves are also known as rubber-coated gloves.

Medical nitrile gloves seem to have become a companion who always stands shoulder to shoulder with manual medical workers. It will bring safety and reduce the risk of injury as well as health effects by factors outside the working environment. Each profession has different hazardous properties, and then protective gloves have separate design.

Creating a safe working environment is essential work that we should not overlook. In addition, when protected by protective equipment, workers will not have to worry about distracting or fearing when working.

5 TYPES OF COMMON MEDICAL NITRILE GLOVES CURRENTLY

– Cotton protective cloth gloves

These gloves have cotton material but not durable than medical nitrile gloves. With the advantage of wearing, it feels comfortable and comfortable because of the soft material, good sweat absorption and ventilation. Moreover, it is very suitable for people with sensitive skin because it does not cause skin irritation. Thin, light fabric feels authentic to use and fits snugly in the hand.

Cotton gloves are common for workers working in many different industries such as agriculture, industry, assembling machinery, electrical equipment, electronic components, etc.

– Protective fabric gloves

The fabric is soft, stretchy and cool; so many people choose to use it. With high durability, less shrinkage, it is often common in the garment industry, assembling electronic components, checking product quality because it requires precision and ingenuity.

Polyester medical nitrile gloves

Medical nitrile gloves are a product line with very high durability, good elasticity, so it can be common for a long time after washing and drying. The adhesion is also quite good, so it can be anti-slip and prevent some common chemicals. Therefore, polyester fabric gloves are often common for painters, metal manufacturers, mechanics, wood factories, etc.

 Jeans protective cloth gloves

Jean fabric gloves have the advantage of good thickness but are not stiff because they come by a soft inner layer, creating a smooth wearing experience. The surface of the gloves has a certain roughness, so it increases friction when holding work items, easy to manipulate, and avoids slipping. Therefore, it is often common in the mechanical industry, assembling cars, motorcycles, ...

The gloves protection are among the devices to protect individual (DPI) and are common to cover and protect workers' hands.

Why medical staff need medical nitrile gloves?

It is important to protect our hands with medical nitrile gloves. Below we give you some more information on the various types of gloves, on the materials and on the advantages of choosing a reusable rather than a disposable glove.

The materials

We assume that the choice of gloves also depends on what we do with our hands: if we have manual work or if we have to use them only when we go out for errands, as the physical properties of the gloves are related to the materials with which they are produced, and the choice of material will be made according to the type of actions to be performed.

Medical nitrile gloves can have different materials:

Latex: they are thin, elastic and adherent. They give good protection against contamination and infections.

Nitrile: they are a great alternative for all those individuals who are allergic to latex. They are resistant, even to perforation, and are in fact also common in the mechanical field.

Vinyl: in synthetic material, they have a good thickness, which guarantees safety and resistance.

Polyethylene: they are suitable for contact with food; they can also be common in the medical or aesthetic field. They have the advantage of maintaining a high tactile sensitivity.

Disposable and reusable medical nitrile gloves

The most common are the disposable medical nitrile gloves, usually comes by less thickness, often sprinkled inside with corn starch or other substances that help to wear them easily.

The reusable models, although less well known, offer several advantages:

 

• washable .
• Moreover, we can sanitize with alcohol-based gels.
• They are thicker and stronger.
• They are a little longer and also protect part of the forearm.

Some models are equipped with internal flocking, avoiding excessive sweating and can therefore be worn for longer.

How to wear medical nitrile gloves?

Just as there are precise guidelines for wearing the mask, there are also some for the gloves that we indicate below:

 

1. Wash your hands well and dry them.
2. it is important to adopt the right technique to remove them :
3. Remove the first glove with the other hand without touching the skin.
4. Lift the flap and insert your middle finger to pull and remove the medical nitrile gloves.
5. Insert the index and middle fingers of the free hand inside the other glove, avoiding touching the outer surface.
6. Once both gloves have been removed , discard them and wash your hands

Gloves can be common for different purposes:

Medical nitrile gloves provide a protective barrier and prevent hand contamination when blood, body fluids, secretions, excretions, mucous membranes and skin are touched.

Reduce the probability that microorganisms present on the hands of personnel are transmitted during procedures.

Reduce the probability that the hands of personnel contaminated with microorganisms from another person.

It's important to have on mind:

To touch blood, organic fluids, secretions, excretions or contaminated material, it is necessary to wear gloves.

Take off gloves immediately after use and wash hands before touching uncontaminated materials or surfaces and before assisting another person.

How to protect medical nitrile gloves?

Medical nitrile gloves can lose their integrity with use, therefore, when procedures are long and whenever they lose their integrity, they should be changed and hands washed before putting on others.

Hands are undoubtedly the most precious tool and that is why we must take care of and protect them. An operator who is in contact with some dangerous material, exposed to possible cuts or burns… must keep his hands and arms well protected.

In addition, the company has certain legal obligations in this regard. Do you want to know more about work gloves? In this article we tell you everything you need to know.

Medical nitrile gloves: law and regulations

The medical nitrile gloves companies have the obligation to carry out security controls and to evaluate the risks. This assessment will reveal whether it is necessary for employees to protect their hands and arms from potential hazards.