Month: May 2021

Industrial chemical gloves are the most common personal protective equipment for hands. Today, a fairly wide range of work gloves is presented on the market. Below are the groups of gloves available in our warehouse:

• Cotton gloves with PVC, or latex coating
• Similarly, Nylon gloves
• Nitrile gloves, MBS
• Rubber and latex gloves
• Leather gloves and split leather
• Moreover, Insulated gloves
• Leggings of welders
• Work gloves

Industrial chemical gloves with PVC, or latex coating

Industrial chemical gloves with PVC, or latex coating, are the most affordable and widespread means of protecting hands from mechanical stress and industrial pollution, and they are also the most commonly used gloves in everyday life. The most important characteristics of cotton gloves are:

• Knitting class numbers correspond to the number of loops per inch. The knitting density directly depends on the number of loops, i.e. the higher the class, the higher the density.
• number of threads
• Moreover, yarn color - white, black, gray, yellow, blue, etc.
• type of coverage - PVC point, PVC wave, PVC tractor (or protector), latex palm coating .

Nylon gloves

Nylon is a tough polyamide-based fiber, which means it is a very thin and durable material. Gloves made of nylon provide good sensitivity to the fingers while working and at the same time, nylon gloves are very durable and wear-resistant. For added protection, nylon gloves are often coated with different coatings: nitrile, latex, polyurethane, or PVC.

 

Leather gloves and split leather

Split is a layer of leather obtained by peeling genuine leather into several layers using special equipment.

Basically, split gloves are one of the varieties of industrial chemical gloves.

Gloves can also be made of full grain leather. In the manufacture of gloves, the middle layer of leather is used, which better mechanical strength has compared to other layers of leather.

Leather gloves or split leather are suitable for construction, agricultural, transport or assembly work. Moreover, they will protect your hands from mechanical and thermal damage.

Insulated industrial chemical gloves

Of course, in our climate one cannot do without such a class of gloves as insulated gloves. Insulated gloves are presented here by such types as knitted from half-woolen thread, split and leather gloves.

Work gloves

Work gloves are the least comfortable in comparison with work gloves, but they have a number of advantages. The mittens are better suited for working on rough surfaces, where accuracy of movement is not so important.

 

And of course the mittens keep the warmth of the hands better; probably more than one watchman will not agree to change the insulated mittens for gloves when it is necessary to withstand the shift in the cold. Work gloves are made of various materials: cotton, tarpaulin, insulated with batting, fur, etc.

COTTON, POLYESTER AND BLENDED WORK GLOVES: A COMPARISON

Alas, it is impossible to find a universal remedy. Each type of glove has its own advantages and disadvantages; as a result, a different type of work glove is best suited for each type of activity. It is impossible to give universal advice, you need to know exactly what kind of activity will be improved by working gloves, as well as what budget a potential buyer has. Only on the basis of these data can the correct choice of a work glove be made.

So, let's look at the advantages and disadvantages of the three main types of work gloves: HB gloves, polyester gloves and blended yarn gloves.

COTTON WORK GLOVES

The most popular gloves among buyers. The high popularity of these gloves is due to the fact that it can be used in the widest range of human activities, while the cost of one pair of work gloves rarely exceeds 8 rubles in bulk purchases and 15 rubles in retail. There are no special requirements for cotton industrial chemical gloves (as, for example, for oil-resistant and dielectric gloves).

Cotton gloves are made of highly stretchable knitwear, which allows you to buy a glove not always in the size of your hand, but slightly lower. The HB glove stretches perfectly on the hand, takes on an anatomical shape even after several cycles of hard use.

What are the advantages of cotton industrial chemical gloves?

The advantages of cotton work gloves include the ability to absorb moisture well, excellent air exchange, which does not allow the hand to sweat and makes it possible to work in hot weather. Cotton gloves do not collect static electricity and do not cause allergies. When wet, cotton work gloves dry very quickly.

The disadvantages include a very modest wear resistance. Almost all gloves are not able to survive more than one day of concrete work. Cotton gloves are prone to tearing from strong impacts; they can burn, and do not protect the body from electricity.

When wet, a cotton glove is capable of taking a lot of heat from the human body, and therefore the hand will freeze. Working in a damp environment with a cotton glove is not a pleasant pastime, as your hand is constantly wet.

SYNTHETIC POLYESTER WORK GLOVES

Polyester synthetic work gloves are the exact opposite of cotton. Gloves easily withstand strong physical influences and stress, practically do not get wet and are able to withstand cuts and punctures (albeit of small strength and magnitude). Polyester synthetic work gloves are highly abrasion, solvent, paint and UV resistant.

At the same time, polyester industrial chemical gloves have several disadvantages. First of all, it is constantly hot in synthetic gloves - they are rather hard to let air through, so it becomes stuffy inside the glove.

The second disadvantage of working with polyester work gloves is the high tendency to build up electrical static charge, which makes it impossible to work with these gloves with electronics.

Conclusion

You can ensure worker safety by using chemical resistant gloves. These types of gloves are quite cheap and effective. We can say that, using gloves will save you from serious injuries.

Work gloves: areas of use and selection criteria

The examination gloves made for the job can be very different. The perfection of the technologies used allows the use of latex, wool, synthetics, nylon, etc. for their creation. The abundance of types of these products presented on the modern market can cause unexpected difficulty in choosing the most optimal products for use in specific conditions.

This article is intended to deal with this.

Materials for examination gloves

They are durable enough; they are easily washed off and become usable again. Durability depends on the density of the material, as well as on the availability of additional coating.

How examination gloves vary in terms of class?

These gloves also differ in the class of knitting. For example, class 7.5 is sufficient for domestic use and has a more affordable cost. But class 10, made of a thinner thread and featuring a higher knit density, allows you to be almost invisible on the hand, providing high accuracy of movements.

An additional layer of PVC can be applied to increase strength and improve adhesion to objects. Such products are more expensive, but they are also distinguished by enviable wear resistance.

Nylon threads, latex, nitrile and other fibers are also used in the creation of examination gloves.

Varieties produced by modern industry

Latex coated - designed for work in the field, with household chemicals, construction waste, car repairs, etc. Not suitable for handling sharp, cutting objects, garden thorns and similar things. Material damage due to burst is very likely.

Made entirely of latex - excellent moisture resistance and protection against mechanical damage.

Latex coated nylon products - good for working with small parts. It provides sensitivity, a snug fit, and a latex layer to prevent slipping.

Wool blend examination gloves

They work at low temperatures. Moreover, they save even in a fairly severe frost, creating conditions for installation and assembly work. They are also used in agriculture and forestry.

Nylon products with double nitrile semi-shine - do not absorb oil, repel water, they can work with aggressive chemicals. They protect well from burns and mechanical stress. They have an anti-slip effect. Provide work comfort.

Choose quality examination gloves for your working conditions in everyday life or in production in the catalog of our online store. Place an order and get everything you need in a convenient mode and at an affordable price.

How do protective gloves help you?

Gloves for various types of purposes are an irreplaceable thing, as they will protect your hands from various types of damage. Most often, in the workplace, the hands are primarily injured. In order to best protect them from injury, you need to know which gloves will help prevent damage.

It occurs when exposed to high or low temperatures, cuts, punctures, or chemicals. Especially in the workplace, the employer is obliged to protect his employees from various kinds of injuries. Most of the injuries occur due to work with improperly selected gloves or without them at all. In this article, we will help you figure out which gloves are right for you.

Cotton jersey gloves

The seventh grade - the thickest, they are used in agriculture, construction work, etc.

 

The tenth grade gloves are thinner. They are used for various types of work, for example, packing goods, workshops, laboratories, etc.

The thirteenth class of gloves is the thinnest type, they are used mainly for assembling mechanisms that require great sensitivity of the hands and at the same time the parts remain clean.

Gloves in knitted cotton fabric and PVC dot coated

Such examination gloves are more durable and anti-slip due to the adhesion of PVC to different surfaces. These gloves will perfectly serve for cleaning various debris, they will perfectly protect your hands. Also, this coating helps to firmly grip various tools and hold them securely in the hand.

When choosing this type of gloves, pay attention to the PVC dots, they should not crumble and crack. In order to make sure of the quality, try to break the point and if you succeed, then it is better to refuse to buy such gloves.

Nylon Gloves with Dot

 

These micro dot gloves work in the same way as PVC dot gloves, but they are designed for work that requires a lot of hand sensitivity.

This type of examination gloves is resistant to various acid-base substances. These gloves are suitable for people who work with various chemicals. They will protect your hands from acid, alcohol, oil, solvent, and other chemicals. This type of gloves can be made of various materials: latex, PVC, nitrile. Interior trim can be cotton for added comfort.

There are two types of these gloves. The first is for the coarser work and the second is for the finer. These gloves must be tested before use.

Gloves with one piece PVC coating

 

This type of glove is mainly intended for contact with liquid and oil. They perfectly protect your hands from dirt. These gloves are made with tighter cuffs, due to this, during operation; they sit securely on the hand. Also, these gloves are anti-slip; therefore they will perfectly serve in the work with sliding material.

One thing we need to focus on the demand of any glove. Ever glove has its own requirement. If we talk about examination glove, we want more flexibility. Furthermore, it should be germ- resistant as well. Many people ignore the point of quality in the terms of buying gloves. This is not a good practice. The biggest reason is material plays a vital role in choosing fine quality gloves.

Conclusion

When choosing examination gloves, make sure they comply with the technical regulations. Gloves must have all the necessary certificates of quality and conformity, as they are responsible for the safety of the worker.

In this article, we have tried to consider all types of gloves so that everyone can find the product they need. Moreover, it will help you in choosing a quality glove that will assist you in examination of various objects overall.

Surgical gloves are reliable hand protection during operations with an increased risk of infection. For reliable isolation of the skin of the hands, two pairs are common - the lower and the upper.

Both come from natural rubber latex using technology that provides the highest degree of protection. The sterile package contains two pairs of gloves. The inner ones are green, latex. Outerwear ½ size larger, white or light beige, made without dye.

Both pairs are powder-free.

How the outer pair of surgical gloves is crafted?

The outer pair comes with a micro-textured material for an anti-slip effect. This makes it possible to securely hold metal instruments during surgery, even in extremely humid environments.

It is possible to timely identify the place of damage and replace the protective products.

Convenience level of surgical gloves:

Surgical gloves are made from natural material - latex. They have an anatomical shape, and due to their increased elasticity, they adapt to the peculiarities of the structure of the fingers. Ease of use ensures the smoothness of the material of the inner surfaces of the products - they are easy to put on and take off even without powder.

For comfortable use, sterile gloves are selected by size. The manufacturers offer 7 different sizes - from 5.5 to 8.5. The number (denoting size) is equal to the width of the palm in centimeters.

Each package contains two pairs - an inner and an outer one, each of them is in a sealed sterile envelope. There are 25 packages in the block. The quality of the products meets the accepted standards and norms.

Necessary precautions for surgical gloves:

Latex is not protected from punctures and damage; it can lose elasticity due to inappropriate storage conditions.  Hence, you should not expose your surgical gloves to direct sunlight.

Prohibited for surgical gloves:

1. use in a sterile environment in case of damage to the package;
2. use gloves of inappropriate size in surgical practice;
3. Moreover, use latex products in case of an allergic reaction to the material from which they are made;
4. continue to use in case of damage and puncture of the material;
5. increase the duration of wearing one pair for more than 120 minutes;
6. put on again.

Natural latex provokes allergic reactions in case of individual intolerance. Before using the products, you need to make sure that there is no reaction. If there is no hypersensitivity, additional hand care requires with regular contact with latex.

Can you find a wide variety of disposable surgical gloves?

Yes, you can find a wide variety of disposable latex surgical gloves; vinyl and nitrile gloves is easy to find. At the same time, it is quite durable, comfortable and allows you to maintain the sensitivity of your fingers.

 

Latex is obtained from the sap of the hevea tree with various impurities. Gloves stretch well, fit the hand well and do not interfere with movement.

What are latex surgical gloves?

Distinguish between classifications by purpose, processing method, type of cuff, size. We talk about the purpose of gloves, that is, household and medical products.

Latex examination gloves are good in the medical field. They are quite thin, but at the same time durable and protect against infection, biological fluids on the skin of the hands. They allow you to hold the instrument securely in your hand without reducing the sensitivity of your fingers.

Surgical gloves have special requirements. They should have sufficiently long cuffs, fit snugly around the arm, protect well from the ingress of microorganisms, and be sterile.

Household gloves are common when cleaning the house, in cleaning services, in the food industry. They protect hands from moisture, dust, dirt, aggressive detergents. Some gloves have a grooved surface to prevent objects from slipping out of your hands.

Features and Benefits of Latex Surgical Gloves:

Latex is an inexpensive material that protects the skin of the hands and does not interfere with movement. Compared to vinyl and nitrile, latex costs significantly less. In addition to the low price, latex gloves have several important advantages:

• high protective properties (does not allow liquids, dirt, dust, chemicals, acids and alkalis to pass through);
• high strength (gloves stretch perfectly and return their shape without tears, are resistant to punctures and tears);
• elasticity (products fit the hand tightly, after use they quickly return to their previous size and shape);
• quick hand adaptation;
• a wide selection (on sale you can find disposable surgical glovesof various colors, thicknesses, sizes that will allow you to perform any work).

Gloves for a doctor are a must-have protection. However, a number of requirements come on them, on which the convenience and safety of a specialist's work depends.

How to calculate the exact size?

For any doctor, convenience in work is a guarantee of the accuracy and quality of treatment. This is especially true for surgeons who can perform several surgical interventions per day. The wrong size can significantly affect the specialist from the negative side. For example, if the gloves are small, there are risks:

• squeezing the hand;
• rupture during the operation, which is unacceptable due to the increased bacteriological environment;
• loss of sensitivity due to material pressure;
• skin reactions, redness, debate of the epidermis, etc.

When your surgical gloves are large, there is a risk of infection as it does not fit snugly against the skin. Also, when carrying out cosmological or surgical procedures, you can easily hook a material or instrument with it, which will also lead to rupture.

And, of course, if the product is too large, it can simply fall off the hand, which in an operating room, for example, is unacceptable.

Final Words

In the classification of the international health organization, a range of glove sizes distinguishes from 5.5 to 9. You can find out the individual parameter in the following way:

Moreover, if you want to buy reliable gloves from china wholesale manufacturer, this is the best place.

The simplicity of the appearance of wholesale nitrile gloves should not deceive, each variety has its own history and purpose. Among other types of remedies, this is often treated with the greatest attention. Moreover, it's all about the clear functions and the conditions under which the gloves protect. A person who works without gloves quickly becomes clear that they protect against:

• mud;
• mechanical damage: cuts, scratches, punctures;
• thermal damage such as burns;
  

The rest is taken on faith, that is:

• protection against bacteria, viruses;
• penetration of chemicals causing various reactions;
• Similarly, it reduces the degree of injury in case of serious mechanical damage.

WHAT ARE WORKING GLOVES MADE OF?

It is difficult to verify and hardly anyone wants to. Wholesale nitrile gloves, with the right selection, can do a lot, which is why there are so many types of them. Almost always they are distinguished by the materials used, on the properties of which the purpose depends. Similarly, work gloves, which, by the way, include medical gloves, are made from the following materials:

1. natural and artificial rubber,
2. latex,
3. silicone,
4. cotton,
5. neoprene,
6. nylon,
7. nitrile,
8. leather, its varieties split,
9. polyvinyl chloride.

They are designed to remove excess moisture from the surface of the hands, increase adhesion, waterproofing, thermal insulation, and reduce the risk of contact with the skin of aggressive chemicals such as petroleum products, pathogens. Combinations of materials are increasingly used: cotton-pvc, nylon-rubber, cotton-split and others.

FEATURES OF THE SELECTION OF NITRILE GLOVES

The widespread use of working gloves became possible with the development of their conveyor production, the introduction of the culture of wearing. It is now considered good practice to have disposable hand protection or carefully selected personal gloves, for example, as builders do, whose hands are most exposed to various adverse influences.

Their gloves should be multifunctional, fit perfectly on the arm, and protect the wrist and wrist area. Disposable gloves are used more often by:

• medical staff,
• for cosmetic purposes,
• employees of cleaning companies,
• chefs and pastry chefs.

How to choose right wholesale nitrile gloves?

The correct choice of the height of the glove, its fit to the hand and arm, freedom of movement inside and out - these are the features of the ergonomics of personal protective equipment for hands.

In addition, it is important to take them into account, especially when working with various cutting and piercing tools, including medical ones, glass, and power tools. The most common selection parameters are:

1. palm diameter,
2. its length,
3. cuff length.

The first two parameters are reflected in the type markings: M, L, XL, the latter is indicated separately.

How to choose construction gloves?

In order not to get confused in a wide variety of gloves in hardware stores, we have prepared several basic aspects that you need to focus on when choosing: Fine wholesale nitrile gloves?

Put them back on the counter or scroll further on the page of the online store. If you can see a hand through them, then imagine what will happen to the skin after “protection” with such gloves. In fact, there is no point in them.

 Yarn quality. Is there no composition on the product or is it incomprehensible? You should refuse to buy such gloves. If the material is unreliable, then it can tear at any time, and this is fraught with cuts and large calluses.

Low cuff: Some people think it doesn't matter at all. But professional builders will quickly dissuade you from this. It is the cuff that protects the bend of the arm, where the most unprotected veins and tendons.

PVC coating: In no case should it be "glass". Soft “bumps” in gloves prevent slipping of tools and other objects in the hands. If the quality of the coating is poor, it can cause injuries due to poor fixation.

How to choose the size of work gloves?

The standard universal size of working construction gloves is 10. It is used for the following parameters: medium and large female hand; small and medium male hands. The length from the cuff to the end of the middle finger is 24 centimeters, and the width of the palm is 13 centimeters.

Of course, they stretch, but if the wholesale nitrile gloves are small, then it will be uncomfortable to work in them.  Furthermore, the second most popular is size 11. Moreover, it is designed for a large man's palm and thumbs. The length of the eleventh glove size is 25.5 -26 centimeters, and the width is up to 14.

The third most common size 9. It is most often suitable for female hands.  The measurements described are taken from gloves of medium knit and weight.

Simple protection - wholesale nitrile gloves

According to statistics, only twenty percent of men think about protecting their hands during construction, repair or other work. As for women, they often neglect work gloves at the time of contact with household chemicals, as well as when in contact with the ground, at the time of transplanting plants or working in a garden or vegetable garden.

 

Work gloves - protection of hands as well as the whole body. Often, contact with substances that are part of various products, including construction, such as solvents, paints, plaster does not lead to visible consequences.

Doctors say that allergic reactions can catch us later, while in the form of urticaria, rash, and shortness of breath. Substances enter our body through our hands, which should be protected.

What wholesale nitrile gloves can protect from?

Gloves for work are divided into several main types, of course, there are others? Moreover, it is worth saying that they differ in the direction of protection:

• mechanical,

Some work gloves combine both directions. For many jobs, gloves are required, which, on the one hand, will fit quite tightly on the hand, providing a high tactile perception, and on the other hand, will protect the skin from aggressive solutions.

For such purposes, nitrile-impregnated woven gloves or all-nitrile wholesale nitrile gloves are often chosen. If nitrile is applied to cotton, moisture is absorbed, leaving the surface of the hand dry. Thus, sliding inside does not occur, working with such gloves is comfortable, but the tactile sensation is somewhat blurred.

Conclusion

For work with dry building materials, for example, laying laminate flooring, as well as for carpentry work, gloves protect hands from abrasions and scratches, minor mechanical damage. An interesting version of work is wholesale nitrile gloves.

Initially, leggings were used in foundry, then for welding. Now these thick gloves are used when there is a need to protect hands, but there is no need to work with small parts. An example is the laying of paving stones.

How work gloves help to save your hands from hazard?

The hands are the part most exposed to risks in the workplace. Knowing the risks and the rules leads to choosing the most suitable work nitrile gloves for you. In all work environments we are subject to the risk of small or large accidents involving the hands.

From the office, to the workshop, from the steel plant to the analysis laboratory, the hands are the most used tool in the workplace, thus becoming the part most exposed to injuries in our body. It is estimated that 60% of workplace accidents affect the upper limbs.

What are the risks at work?

When we talk about risk, we remember that we mean any situation that can cause any type of damage to the health of the individual. When the RSPP (company safety manager) has to choose which work gloves to buy, he must consider risk as a starting point for safety assessments.

The risk, in fact, is the fundamental tool that allows the employer to identify the prevention and protection measures.

What risks are there in the workplace for the hands?

There are different types of risks to which hands can be subjected at work. Categorizing them was a way to be able to respond promptly to every need, also from the point of view of the relative reference standard.

Check out the different categories of risk!
Risk assessment is classified into the following 3 categories:

• Category I ^: minimal risks. Protective nitrile glovesfor this category are those related to jobs that do not involve particularly serious risks. The uses can be, for example, hobby and gardening.
• Category 2 ^: medium risks. By medium risk we mean that of industrial works in general that do not foresee fatal or permanent damage to health.
• Category 3 ^: fatal or irreversible risks. Generally linked to the chemical industry work environments, to the great dangers of cutting, to the heat of the fire, all situations with a high risk of irreparable damage.

A pictogram is linked to each type of risk, that is an easily recognizable symbol that must be shown on the glove. A series of numbers is added to the pictogram (s) that identify the levels of performance/protection.

This corresponds to a number indicating a particular category or scale according to which test results are graded. In most cases, these results fall within a scale of values ​​set at 5 levels (0 - 5), where the performance level increases as the number increases.

At 5 the performance level for that parameter is maximum.

The pictograms on work nitrile gloves: how to read them?

By law, nitrile gloves must be labeled.
The label shows:

• the pictograms, i.e., the indication of the risks from which the gloves protect,
• the corresponding EC legislation to which they comply,
• performance levels,
• the CE mark,
• the size,
• Moreover, the name or commercial code of the glove,
• any expiration date (for dielectric gloves).

The image below shows the pictograms used for the nitrile work gloves and the corresponding specific regulations.

Are there the right work gloves for every risk?

Due to the high degree of exposure of the hands to various types of risks, there are many types of gloves. The materials with which they can be made, for example, are:

• latex
• rubber
• polyurethane
• steel
• nitrile
• skin
• Kevlar
• PVC

Latex gloves:

They are gloves with a high level of comfort, they adhere well to the skin and being very thin sometimes you even forget you are wearing them, we recommend for the umpteenth time not to touch your mouth, nose and eyes even with gloves otherwise you will make them decay the purpose for which we used them.

Latex work glove

This type of glove has a latex glove inside but, on the outside, they have a reinforced surface suitable for more demanding manual jobs, you can find them in sizes S - M - L - XL.

Latex gloves for children

As with normal latex gloves, these also have a high elasticity and tensile strength.

This type of gloves is recommended for children between the ages of 4 and 10, of course you will have to instruct them and make sure that even if you wear them, they do not touch your mouth, nose or eyes.

 

Also teach them the right technique to take them off, by the way, we were almost forgetting to tell you that all disposable gloves are ambidextrous and you can find them in the following sizes: S - M - L.

Vinyl gloves:

They differ from latex gloves because these are produced with synthetic raw materials, are less resistant than the previous ones, are cheaper but also less resistant to tearing and perforation.

Most of the time these are chosen as an alternative to latex ones by all those people who are allergic to them.

In the case of vinyl gloves the available sizes are S - M - L - XL.

Nitrile gloves:

Nitrile gloves are ideal to use for people who have sensitive skin. Moreover, this material guarantees excellent insulation, also in this case they adhere optimally to the skin and guarantee excellent sensitivity to touch, they are hypoallergenic and you can find them in the following sizes: XS - S - M - L - XL.

When does it make sense to use disposable gloves and what benefits do, they offer?

In the food industry, wearing gloves is often mandatory, in the gastronomic sector it is not. There are conflicting opinions among cooks that working with gloves is as hygienic as working without them.

Many cooks recommend wearing gloves to protect your hands and avoid washing them too often, others don't like the feel of gloves and prefer to work with your bare hands. In fact, only with uncovered fingers can the cook perceive correctly by touch in order to work quickly and accurately: since the hands are the cook's tool, this is indispensable.

Let's answer the question of whether wearing gloves makes sense.

More hygienic or not?

Meanwhile, current studies show that wearing gloves (nitrile gloves) is no more hygienic than working with bare hands, provided that good hand hygiene is maintained. Often working with disposable gloves is even unsanitary, as the concept of "disposable" is not taken too seriously by many cooks.

If you wear gloves while working, you need to change them regularly, as a rule every time you do a different activity or deal with a different product, which consumes a lot of disposable gloves during the day.

So even wearing gloves does not avoid washing your hands regularly.

What are the hand hygiene fundamentals?

• Don't wear jewelry
• Keep your nails short
• Wash your hands regularly under warm running water with soap or special kitchen hand sanitizers
• After washing them, dry your hands with a disposable towel
• Regularly take care of your hands

Hand hygiene with nitrile gloves:

• Put on gloves after washing your hands
• Change gloves regularly
• Wash your hands thoroughly before changing gloves

Even when you are wearing nitrile gloves, your hands must be clean so as not to contaminate them. It is also necessary to wash your hands afterwards, in fact under the gloves the skin sweats quickly and the natural bacteria reproduce on the skin.

How to use protective gloves properly while working in hazards chemical?

We are here to talk about reliable skin protection equipment, known as chemical gloves.

When should you use chemical gloves to serve?

The chemical glove serves to protect the worker's hands and skin, against cracks, cracks, dehydration, and against prominent dryness from contact with chemicals.

Do the chemical gloves replace the physical glove?

The gloves that you use in hazards chemical can replace 100% the physical glove as to the agents that are in the corresponding group.

The limitation is that the chemical protective gloves do not protect against abrasive, cutting, scoring and shock agents.

Do the chemical gloves have CA?

The ones from Nutriex that are serving as the basis for this article have. What says that the chemical glove is PPE (Personal Protective Equipment)!

What are the important questions of tact?

The good thing about chemical gloves is that they allow protection even in places where the physical glove is complicated. There are places where the use of the glove, for example, scrapes makes it difficult for the worker to feel. At that point I remember when I worked as a Bricklayer Servant.

When I used a scrape glove to, for example, remove ceramics from the floor, and lost sensitivity (touch). To compensate, he held the objects more tightly (mallet and chisel), and ended the day with his hands hurting a lot.

When we choose a chemical glove (when it is possible to choose a chemical glove), this does not happen.

What are the chemical gloves indications and types?

Below 3 groups of chemical gloves and their applications:

How to choose your chemical gloves according to your activities?

First of all, the laboratory technician must first list the criteria for each object or product to be handled in order to adapt the type of glove to be used:

• What are the properties of the object or product? Risk of abrasion, burning...?
• The type of exposure: Continuous hand immersion? Protection against possible splashes? Occasional exposure to the product or material?
• Short or long gloves?
• Disposable gloves or reusable gloves? Define the cleaning mode for reusable gloves (decontamination).
• Need to wear soft gloves in order to have tactile sensitivity?

Once the type has been identified, the laboratory technician must check whether the chemical gloves have no holes before using them (fill with air or water in case of doubt).

What are the different types of materials of chemical gloves?

Latex glove (natural rubber):

Properties:

Generally, it has excellent elasticity (flexibility) and good resistance to wear as well as to aqueous or diluted solutions.

Use:

Generally, it is recommended for use involving precise handling and tactile sensitivity. .

Nitrile glove (synthetic rubber):

Properties:

Good mechanical resistance (only concerns reusable gloves), good protection against chemicals (resistance to oils, greases, primary alcohols, aliphatic hydrocarbons, aqueous solutions).

Use:

It is good for precise handling and tactile sensitivity. Should not be recommended in cold environments (<- 40 ° C) for risks of stiffening (difficult use).

Neoprene glove (synthetic rubber):

Properties:

Well resistant to strong acids/bases and aqueous solutions.

 

Use:

Recommended for use involving precise handling and tactile sensitivity.

PVC glove also called Vinyl (thermoplastic polymer):

Properties:

It provides correct resistance to acids/bases and alcohols in the case of reusable chemical gloves.

Use:

Basically, it should be limited to low-risk situations.

Leather glove (crust):

Properties:

Resistant, heat-resistant, withstands humidity.

Use:

Generally used for handling hot objects.

Cotton glove:

Properties:

Good resistance, comfortable, low stretch, heat resistant (<50 ° C) for short periods of time and hygienic (absorbs perspiration).

Use:

It is good for basic object manipulation. Does not protect against chemicals and liquids.

In the warehouse, the hands are the most exposed members of the operators. For this reason, equipping your handlers is not only common sense, but an obligation.

How to choose the right chemical gloves according to the standards?

Discover a simple and clear RAJA guide for your next purchases.

The various risks to which your employees are exposed

Warehouse work is, in essence, manual. The hands of your employees are therefore particularly exposed to various risks.

Depending on the sector of activity in which you operate, these risks may be more or less extreme:

What are the different types of risks?

Mechanical risks:

It is the most common, but also the most disabling. We are talking here about the risk of crushing, cuts or perforations to which we are exposed when wearing or moving an object for example.

Thermal hazards:

Hands are extremely sensitive to temperature. If you are working in particularly hot or cold environments, you should choose suitable protective equipment.

Chemical risks:

Some operators have to handle chemicals that are particularly harmful to the skin. Hence, in such situations, chemical gloves are highly recommended.

Electrical risks:

Warehouses that store electrical and electronic products run the risk of electrocution to their handlers (discharges, conductivity, etc.).

Also learn about hand protection and personal safety at work!

It's no surprise to anyone: hands and fingers are the parts of the body most often injured at work. These are mostly cutting and bruise, but hand contact with chemicals is also a risk.

You can protect yourself by wearing safety gloves that you will however have to choose according to the activity performed and the protection they offer. Find out more about hand protection and personal safety at work in this article.

What safety gloves do you need?

To choose the right gloves, it is important to properly assess the risks in your workplace. Are you looking for cut resistant gloves, heat resistant or just thermal work gloves? Do you need protection against chemicals, electricity or vibrations?

Furthermore, this information is essential to make the right choice. It is therefore essential for you to make an inventory of the tasks that you accomplish.

For chemical protection, you need chemical gloves for the safety of your hands.

What are other points of attention when choosing safety gloves?

• Choose safety gloves that meet European standards. You will recognize them by their CE marking;
• Take into account the duration of the wearing. Comfort is extremely important, especially if work gloves have to be worn for a long time;
• Also consider aspects like mobility, finger sensitivity and glove grip. For precision work, use gloves other than for heavy work.

Why medical professionals prefer gloves in the latest pandemic of COVID-19?

COVID-19 has determined that the use of latex examination gloves becomes a matter of interest for the entire population. The Pharmacy, due to its proximity and training of its professionals, is the ideal establishment from which to offer quality information on its correct use.

Why using latex examination gloves?

Generally, latex examination gloves have become popular in medical fields. These days, these gloves are easily available. To ensure personal safety, I would recommend using them on regular basis. There are different types of gloves; you can choose them according to your needs. Furthermore, there are some laws in various industries that recommend using personal protecting equipment.

You need to follow such regulations, and these gloves are best for personal protection in variety of activities.

Currently, due to the situation caused by the new coronavirus, the use of gloves has transcended the exclusively work environment to be an issue that affects the entire population and that generates numerous doubts and queries in pharmacies every day.

 What gloves should I choose?

Before defining the different types of latex examination gloves, and establishing which criteria should help in their choice, it is important to bear in mind that gloves represent a physical barrier against direct hand contact with germs:

1. a)Glove defects resulting from the manufacturing process.
2. b) Rupture of the latex gloves during use.
3. c)Cuts or perforations resulting from the use of instruments.

What are sanitary latex examination gloves?

It is a medical device whose specific medical purpose is to prevent the appearance of a disease in the patient due to the transmission of biological agents through contact with the health professional's hands.

Finally, to carry out a good selection of gloves, it is necessary to choose those that have an appropriate size for the dimensions of our hands, in order to perform the different tasks comfortably and safely.

  How should I put on the latex examination gloves?

The following steps must be taken to put on latex examination gloves safely:

Removal of personal items:

Remove personal items (bracelets, rings, etc.)

Making hand hygiene:

Carry out proper hand hygiene before putting on gloves.

Avoid touching from the outside:

Put them on keeping in mind that the surface of the glove can become contaminated. Avoid touching them on the outside.

 Never touch your face:

Do not touch your face while wearing it.

How should I remove the latex examination gloves?

The following photos show how the gloves should be removed safely:

• Pinch one of the gloves from the outside.
• Remove the gloves without touching the outside.
• Take the removed glove in the other hand.

Which models of latex examination gloves impressed me a lot?

How many gloves have passed through my hands?  But only two models have managed to leave a mythical memory in me. Not only because of their quality, which too, but because of the moment, I used them or because of the goalkeepers who used them.

Two models of latex examination gloves that marked me, of which I had several pairs and that I have managed to have years later.

For the youngest, these gloves will sound like football prehistory, but they are not so much for a 28-year-old goalkeeper who misses that time when the gloves had personality, charisma and excellent performance.

After this presentation, you will ask yourself, what are these gloves?

Well, I'm going to tell you what they are and why they have become legendary for me:

Importance of hand hygiene and use of GLOVES for medical purposes

• The use of glovesdoes not exclude the need to clean your hands.
• Hand hygiene should be practiced whenever appropriate, regardless of the indications regarding the use of latex examination
• Remove gloves for hand hygiene when wearing gloves and in the appropriate situation.
• Take off your gloves after every activity and clean your hands - gloves can carry germs.
• Wear gloves only when indicated in "standard precautions and contact cases”. Failure to do so could pose a significant risk of spreading germs.

The latex examination gloves pyramid:

The glove pyramid will help you to decide when you should wear
gloves. Gloves should be worn whenever the usual precautions warrant and in cases of contact.

The pyramid contains several clinical examples in which the use of gloves is not indicated, and others in which the use of sterile or examination gloves is indicated.

 The importance of using sterile gloves:

• Surgical procedures.
• Vaginal delivery
• Invasive radiological procedures;
• Vascular access and vascular procedures (central tubes).
• Preparation of total parental nutrition and chemotherapeutic agents.

What are the 5 Reasons to Wear Powder-Free Gloves?

Gloves e.g., latex examination gloves are an essential product in every dental clinic, since they act as a mechanical barrier against the possible transmission of cross infections and their consequent health risk.

However, when choosing our gloves, we may have various doubts. Should I buy gloves with or without powder? Although powdered gloves have a lubricating effect, powder-free gloves are a great alternative as they undergo an intensive washing process and are coated with synthetic polymers to give them the same characteristics as powdered gloves.

Discover below the reasons to start using powder-free latex examination gloves

1. Dust can cause allergies.

Powdered gloves increase the risk of latex allergen sensitization and allergic reactions. To completely eliminate this risk, switch to powder-free synthetic gloves.

2. Dust can cause postoperative complications, delayed wound healing, and even additional surgeries in patients.

Final Words

Latex examination gloves dust reduces the inoculum of bacteria required to produce abscesses, thereby increasing the risk of postoperative wound infection. In addition, the powder delays wound healing and disrupt the normal repair process, while at the same time increasing the inflammatory response of wounds.

Using powder-free gloves reduces the costs derived from this type of complications.

How protective shoes covers are helpful for handling grinders?

Maintaining safety is essential to avoid labor lawsuits and losses at work. The safety of life for those who operate with grinders must always be first in your company, and dust isolation protective shoe covers when handling this type of tool.

The grinder is a very useful and practical tool, as it is electrical equipment that is used both for cutting, sanding, polishing and finishing steel parts and metal structures in general.

Secure Shows in Welding or Repairing Activities

Because it is a very versatile tool, it can be used in civil construction, welding or metalwork projects, the use of suitable protective shoes cover helps to increase the touch and providing greater security for the worker.

This tool usually comes with a diamond-tipped blade, which allows you to cut rough materials very easily. That is why it is necessary to use protective equipment to handle this tool safely.

Why safety is necessary in the use of grills?

Even though it is an easy-to-use tool, it still requires a lot of care before and during grinding operations. Hence, dust isolation protective shoe covers is also an important tool that helps you to stay safe.

That is why; it is worth observing and validating the condition of the employee in every way!

Accidents can happen anywhere and therefore little care ends up being little, especially when it comes to tools that have great risks!

That is why we have separated some PPEs indicated for handling this type of tool:
What is a protection or hood?

Never remove the protective cover known as the “hood” of the grinder. It has the function of preventing particles from cutting or sanding from being projected against the equipment operator.

Why Safety always comes first before starting your project?

After everything is right to start your project, you need to prepare your workstation. Whatever work you do, you will be generating dust, flying debris and possibly even sparks.

Remember that safety always comes first! Therefore, wear safety shoes cover appropriate for the activity, dust mask, safety glasses and a face shield.

Is a proper ventilated place necessary?

It is also recommended that you work in a properly ventilated place.

In addition, other safety precautions must be taken when handling a grinder such as:

• Always hold the grinder’s tool carefully with both your hands
• Moreover, Never dwell on the part being cut or ground
• Never put force on the grinder, allowing the speed of the disc to act on the part
• Before turning the machine off, always lift the disc so that it is not in contact with the material. Moreover, this will prevent you from losing control of the tool
• Similarly, Focus on the work at hand, avoiding distractions
• Keep an eye on the environment around you, especially if there are children and animals on site
• Furthermore, Keep the tool and discs clean and preserved, never use worn items or loose parts.

Dust isolation protective shoe covers: Are you using the right shoes cover?

The use of the wrong dust isolation protective shoe covers in the activity performed can cause an accident.

With all the technology in our favor, companies are able to design protective shoes cover with high quality that offer considerable benefits to workers in their activities.

What is dust isolation protective shoe covers and their correct use?

Although it seems very obvious, not everyone is clear that for each type of activity it requires a specific shoes cover, suitable for carrying out the task in question.

One of the biggest problems that security experts face is not the use, but the correct use of dust isolation protective shoe covers for the activity performed.

Although many workers think that using the wrong shoes cover does not seem like a big problem, in reality this is just the tip of the pyramid.

Vaqueta Shoes cover:

With less thickness, it is easy for services that need more tact, such as:

• Electricity works
• Petrochemical industry
• Furniture industry
• Construction
• Assembly of metal structures
• General maintenance
• Mining
• Loading and unloading of materials, among others.

Natrile Shoes cover:

They are more resistant dust isolation protective shoe covers, since they can be made only from Natrile or can be made together with other fabrics. They are ideal for rough jobs, such as:

• Body Shop
• Assembly of metal structures
• Handling of excoriating materials
• Metallurgical work
• Welding work
• Carpentry work
• Agriculture work
• Loading and unloading of heavy materials, among others.

In need of protective shoe covers? Request a quote now for your company, 

Why Regulatory Norm NR6 is essential to use?

According to Regulatory Standard NR6 it is an obligation that your employees are safe in the workplace and this is really not a choice. Please confirm below:

6.6.1 It is up to the employer as to the PPE:

1. a) acquire the appropriate to the risk of each activity
2. b) require its use
3. c) provide the worker with only that approved by the national body responsible for safety and health at work
4. d) guide and train the worker on the proper use, care and conservation
5. e) replace immediately, when damaged or lost
6. f) take responsibility for cleaning and periodic maintenance
7. g) Report any irregularities observed to the MTE.
8. h) register its supply to the worker, with the possibility of adopting books, records or electronic systems

Ensuring the worker, the PPE appropriate to the risk existing in a given activity is the employer's obligation.

How the use of correct PPE is helpful for health and protection?

The use of the correct PPE for its function is essential to ensure the health and protection of the worker, avoiding negative consequences in cases of accidents at work.

Keep in mind that you should use dust isolation protective shoe covers to remain save from dust and sparks. Further, it also ensures about your safety and protection.

The PVC plastic boot is also known as a rubber boot or galoshes. But do you know for which environments its use is indicated?

First of all, it is important to highlight that the PVC boot is protective footwear for workers, suitable for activities that offer light risks.

Because it is a waterproof material, the PVC boot is ideal for working in damp, muddy and wet places. In addition to protecting your feet against moisture, it helps prevent falls and slips due to the non-slip sole.

If you want to know more about the PVC boot, continue with us here. In this article we will cover the following topics:

• What is PVC?
• Indications for using the PVC plastic boot
• Hygiene and conservation.

What is the material of PVC?

The PVC stands for polyvinyl polychloride. This material is composed of 57% chlorine, obtained through the electrolysis of sea salt and 43% ethylene, which is a petroleum derivative.

Depending on the way it is produced, we can have rigid PVC or flexible PVC, which is good in the manufacture of boots.

In addition to being good to use in making shoes, PVC has several other different applications. It is good in tubes and connections, packaging (flexible films and bottles), electrical wires and cables, hoses, clothing, bags and others.

PVC is a material with many benefits. It is waterproof, resistant to most chemicals, resistant to the action of fungi and bacteria and is 100% recyclable.

What are some important indications for using the PVC plastic boot?

PVC plastic boots can have a short, medium or long shaft and can also have the optional gaiter to increase protection. To find out which model is most suitable for your activity, you need to assess the risks and the environment.

One of the main uses of these shoes in the field is such as animal husbandry or agriculture. But as it is a versatile shoe, it can be useful in several situations.

Check it out below!

In Agriculture:

In agriculture it is widely good in the cultivation of fruits and vegetables. Helps protect feet from moisture and chemicals, such as inputs and pesticides.

Both the short-barreled and long-barreled models are easy to use in agriculture, depending on the needs for use and protection. If in doubt, consult a occupational safety professional to indicate the ideal boot.

For animal breeding:

The PVC plastic boot is very useful in activities that involve animal husbandry. As it is an impermeable material, it protects the worker when traveling in damp and wet areas such as corrals, at the time of milking, when moving through pigsties, etc.

The long-barrel models are ideal for use in fisheries and for removing crabs from the mangroves. Hence, in these cases, boots with optional gaiters can also be good.

In several industries:

In the industries, these boots are increasingly suggesting for several sectors: food processing, slaughterhouses, refrigerators, tanneries, farms, chemical industries, among others.

PVC protects the foot of the industrial worker against moisture, corrosive and allergenic agents and chemicals.

Plastic Boots For services provision:

PVC plastic boots are also useful for professionals who work with general services, laboratories, car wash, sanitation, civil construction, hospitals, motorcyclists, etc.

This is a shoe that provides comfort and protection of the feet. In addition to being waterproof, it is a non-slip material that helps prevent falls and slips.

Conservation and Hygiene:

The protective footwear, as well as any other safety equipment, requires care for their operation and their life may be long in the best possible way.

Frequent cleaning is essential to guarantee the durability of the product. After use, do an external and internal cleaning, washing it with detergent, water and soap.

After washing, let it dry naturally in cool, airy places, preferably at room temperature and in the shade. If you need to use it immediately, we recommend you to dry it with absorbent paper (paper towel).

Protect your plastic boots from heat:

Never dry a plastic boot near sources of intense heat, as high temperatures and attempts to accelerate drying will affect the shoe, hardening it and favoring its breakage due to the loss of flexibility.

In case of leather or sole perforation, the PVC boot must discard and replace. And don't forget it is a recyclable material, so try to dispose of it correctly.

The rubber or PVC boot has become very famous in our country as plastic or rubber boots. Did you know that it is very useful in several situations, mainly in the field? We will see here at least four very interesting utilities.

How plastic boots are helpful?

First of all, it is important to note that this boot is protective and safety equipment for the worker. You don’t wear these boots just for convenience, have you thought about that? In addition to protecting your feet from being wet and muddy areas, these rubber boots are excellent for reducing accident risks and maintaining good hygiene in productive areas.

What is the role of plastic boot in Agriculture?

It is widely good in various types of crops, such as fruits and vegetables. It is useful to not get your feet wet, not to get dirty, and also to protect your feet from chemicals such as inputs and pesticides. Then it is an indispensable item!

As the short or long-barreled plastic boot depends on the needs of use, it is therefore important to consult an occupational safety professional to indicate the ideal boot.

Plastic-Boot in Animal Husbandry: 

The dairy farm full for various activities that involve animal husbandries, such as going through pigsties, moving in damp and wet areas such as corrals, when expressing milk, animal drinkers and etc. Those with long-barreled rubber boots are also good for fishing and crab removal.

Plastic Boot for Motorcyclists: 

The rubber boot for motorcyclists is a specific product that guarantees comfort, protection for the feet and waterproofing of the feet. In this case, from the Moto safe plastic boots differ because they have specially designed for the safety of motorcyclists.

Plastic boots for industrial/professional areas: 

These are ideal for various sectors of the industry such as processing of food of vegetable and animal origin, slaughterhouses, refrigerators, tanneries, farms, among others.

In addition, long-barreled and white barrels are often good specifically in the chemical industry, as a crucial safety factor for workers against corrosive and allergenic agents.

How protective gloves save you from high risks on the construction site?

When we talk about a construction site, be it small or large, we encounter many risks. The use of latex gloves for civil construction on a daily basis guarantees protection to the individual.

Protective gloves are essential and mandatory personal protective equipment in many activities.

Companies in civil construction that raise awareness and make gloves available to their employees are able to guarantee a much safer and more productive routine.

Latex gloves in civil construction: differentials and characteristics

The gloves are used in construction for the safe handling of equipment and tools in order to avoid injuries as well as:

• Protect workers from sharp, biological, piercing, thermal, chemical and electrical agents.
• The latexgloves for civil construction must be used by locksmiths, masons, carpenters and other professionals exposed to risks.
• All models must have resistant and malleable fabric, that is, that protects and at the same time allows total comfort and mobility of the fingers of the worker's own hand.
• The materials used can be leather gloves, synthetic fiber, and cotton and there are also options in PVC, neoprene and latex.

Next, we will mention the most common models of gloves for civil construction, check it out!

What are the 9 most common types of latex gloves for civil construction?

• Latex glovesto protect against mechanical hazards such as abrasives and scoring
• Gloves for protection against sharp and piercing equipment / tools
• Gloves for protection against electricity
• Moreover, gloves for protection against high and low temperatures
• Gloves for protection against biological agents such as bacteria, waste and microbes
• Gloves for protection against chemical agents such as corrosive materials and gases / vapors that can be absorbed by the skin
• Vibration protection gloves
• Gloves for protection against moisture such as water and other solutions, such as cleaning products
• Latex glovesfor protection against ionizing radiation

What is the importance of using latex gloves?

Some manual activities can present more than one risk; therefore, gloves must protect against different situations. For this reason, it is extremely important to analyze the risks of the environment well. And make the best choice to ensure the protection of the employee.

You can find gloves for construction here!

PPE: Failure to use it can cause dismissal for cause

PPE's (Personal Protective Equipment) are equipment that aims to eliminate or reduce possible risks that threaten the health or physical integrity of the worker during the exercise of a certain activity.

Knowing all the risks, protective equipment including gloves must be used in all situations that may offer any type of risk.

 

The employee has the right to use quality PPE including latex gloves.

Essential items in PPE:

PPE includes items such as: goggles, ear protectors, sound mufflers, boots, masks, helmets, gloves, seat belts, sunscreen and other protective accessories.

The employee's obligations regarding the use of PPE are:

• Use it only for its intended purpose
• Communicate to the employer any changes that make it unfit for use
• Comply with the employer's instructions on proper use

What is the mandatory use of PPE latex gloves?

According to the Regulatory Norm, of the Ministry of Labor and Employment, the use of PPE's is mandatory. Moreover, the measures of a general nature do not offer full protection against the risks of accidents or illnesses at work.

They should wear latex gloves as well as all other necessary PPE equipment.

LAW also clarifies to employees the obligation to observe the safety rules and the instructions provided by their superiors. And it also determines that the unjustified refusal to use PPE constitutes an employee's fault.

What are the consequences of not using PPE?

According to the LAW, we take it a wrongdoing not to use the PPE. The employer may punish the employee as he deems necessary, from a verbal warning to dismissal for cause.

In short, in addition to the absence provided for in Article 150 of the LAW, unjustifiably refusing to use PPE constitutes at the same time negligence by the employee, contempt for the higher order and noncompliance with company rules.

Therefore, constituting a serious fault, which authorizes dismissal for just cause?

The dismissal of the employee, for just cause, can occur without the company giving a warning or suspension, in case the employee does not properly use the PPE along with latex gloves.

There is no obligation in law to apply warnings and suspensions before dismissal, although this practice helps to protect the employer from labor lawsuits, and to help educate the employee about the need to use PPE.

Why a company should be prepared to protect from any labor action?

Before applying a warning, suspension or dismissing an employee, it is important that the company must be prepared to protect itself if the employee takes any labor action. So, it is important to have:

• Have documents on training and delivery of PPE
• Conduct seasonal training and awareness about occupational safety and PPE
• Posters by the company

What is the importance of protection during the welding process?

The PPE for the professional welder is essential, since during welding the professional is exposed to several accidents that can vary from minor burns to blindness.

Therefore, it is important to always protect yourself from possible damage, such as, in the eyes, in the skin and even inhalation of gases.

With that in mind, that every PPE assigns to a welder's job cannot be neglect for their own safety. All PPE safety equipment and latex gloves are highly important to use as well.

The purpose of each PPE is to seek to eliminate or reduce as much as possible any and all forms of injury that may occur to the professional.

Summary

Autonomous welder professionals have a responsibility to have, purchase and provide the necessary maintenance. If you are an employee of a company, the entire responsibility for providing personal protective equipment is the sole responsibility of the employer.